Best Sellers Gift Ideas New Releases Whole Foods Today's Deals AmazonBasics Coupons Gift Cards Customer Service Free Shipping Shopper Toolkit Registry Sell. Makita Air Compressor Replacement Air Regulator MAC2400 MAC5200 MAC700. Rolair FC250090L 2 HP Wheeled Compressor with Overload Protection and Manual Reset. 3.2 out of 5.
Makita Mac 700 For Sale
OWNERS MANUAL FOR Oil Lubricated Air Compressor MODEL No MAC700 SPECIFICATION CHART Model # MAC700 Horsepower 2 SCFM @ 40 PSIG 3.8 SCFM @ 90 PSIG 3.3 Cut-In Pressure 100 PSI Cut-Out Pressure 130 PSI Bore 47 mm Stroke 44 mm Voltage -Single Phase 120 Motor RPM 1720 Amperage @ max pressure 12.4 Tank Size 2.6 Gallon CSA/US Listed Yes Minimum. View and Download Makita MAC700 owner's manual online. Oil Lubricated Air Compressor. Dealer’s Name and Address to one of the Makita Factory Service Centers listed, or to an Authorized Makita Service Center. Be sure to attach a Model No. Letter to the. May 08, 2019 The Makita MAC700 is a well-engineered big bore air compressor with superb build quality. Read our review of the Makita MAC700 and the MAC5200. Makita’s 2.5HP Air Compressor is equipped with Makita’s Big Bore™ engineered pump cylinder and piston for higher output for two nailers, with less noise and improved job site performance. The MAC2400 delivers industrial power and results with improved durability for tough job site conditions. 2.5 HP with Big Bore™ Engineered Pump.
14
SERVICE INSTRUCTIONS
OWNERS MANUAL
MAKITA - MAC700 / MAC2400 / MAC5200
SERVICE INSTRUCTIONS
Release all air pressure from air tank and unplug outfit.
Remove shroud.
Loosen the top and bottom nut of the outlet tube and remove.
Remove the pressure release tube and fitting.
Unscrew the check valve (turn counterclockwise) using a socket wrench.
Check that the valve disc moves freely inside the check valve and that the
spring holds the disc in the upper, closed position. The check valve may be
cleaned with a suitable solvent.
Apply sealant to the check valve threads. Reinstall the check valve (turn
clockwise).
Replace the pressure release tube and fitting.
Replace the outlet tube and tighten top and bottom nuts.
Replace the shroud.
1)
2)
The motor does not get up to full power or speed.
Fuses blow out when starting the motor; lights dim and remain dim when
motor is started and is running.
1)
2)
3)
4)
5)
6)
7)
8)
9)
10)
Units with External Brass Check Valve Replacement:
Motor:
The motor has a manual reset thermal overload protector switch. If the motor overheats for any
reason, the overload protector will shut off the motor. The motor must be allowed to cool down
before resetting the overload switch and restarting. If the overload protector shuts the motor off
frequently, check for a possible voltage problem. Low voltage can also be suspected when:
Air Filter - Inspection and Replacement:
Keep the air filter clean at all times. Do not operate the compressor with the
air filter removed.
A dirty air filter will not allow the compressor to operate at full capacity. Before
you use the compressor, check the air filter to be sure it is clean.
If it is dirty, check and replace the filter element.
WARNING: Safety Valve – Inspection ... IF THE SAFETY VALVE DOES NOT
WORK PROPERLY, OVER-PRESSURIZATION MAY OCCUR, CAUSING AIR TANK
RUPTURE OR AN EXPLOSION. OCCASIONALLY PULL THE RING ON THE
SAFETY VALVE TO MAKE SURE THAT THE SAFETY VALVE OPERATES
FREELY. IF THE VALVE IS STUCK OR DOES NOT OPERATE SMOOTHLY, IT
MUST BE REPLACED WITH THE SAME TYPE OF VALVE.